Oilfield and Refinery Chemicals

Owing to our in-depth industry experience and precise knowledge of this domain, we are manufacturer, exporter and importer an outstanding assortment of Corrosion Inhibitors.

Features:

• Precisely processed
• Easy to apply
• Repels moisture

Other Details:

Corrosion Inhibitors prevents the metal components of any system from corrosion. Corrosion is caused by various impurities like dissolved and suspended solids, dissolved gases, biological impurities and acids present in the water.

The formation water collected after demulsification process in heater treater contains little emulsified oil in it. This oil required to be separated out before the water is further injected. A good deoiler perform here to minimize the oil content of the formation water (oil-in water emulsion).

Oil wells and gas wells are typically subjected to numerous chemical treatments during their production life to enhance operation and protect asset integrity. Corrosion of metal surfaces due to aqueous or mixed media has long been a problem in the oil and gas industry.

Therefore, it is common practice to employ corrosion inhibitors during the production, transportation, storage, and separation of crude oil and natural gas. Corrosion inhibitors are usually surface-active compounds that form protective films on the surface of the metal which comes in contact with corrosive environments thereby suppressing corrosion.

OLKLIN-HSS-1 is a hydrogen sulfide scavenger is an alkaline ammine complex for typical physical properties and to be use in react rapidly with H2S allowing successful treatment of number of different type of gas streams and remove H2S in blanket gas inside storage tanks and production equipment.

“It is a liquid polymer dispersant and filtration control agent for use in saline water based muds. ”Toinhibit / control oil field specific bacteria is the main purpose of using OLKLIN –AC-95.” It isparticularly effective at preventing gelation in high temperature systems. It is stable to temperaturesin excess of 400°F ( 204°C) and is not affected by calcium contamination and high salt levels.OLKLIN-DFL-50 dispersant does not contain toxic heavy metals such as chromium. It is a costeffective replacement for chrome-containing dispersant in environmentally sensitive areas.

Advantages: Controls rheology and fluid loss at elevated temperatures Excellent substitute for chrome lingo-sulfonate and chrome lignite Excellent for spotting in the hole during trips to prevent temperature gelation May be used in all water based systems

When water comes in contact with systems, corrosion of the metal, during and after contact, is a concern. OLKLIN-CIQUA-924 when added to water in small concentrations are able to prevent corrosion during wet storage. The corrosion inhibitor prevents corrosion even after vacating water from the system.

The corrosion typically encountered in the transport of a fluid containing one or more fluid (corrosion agents) is flow-induced corrosion. In the case of flow-induced corrosion, the degree of corrosion that occurs is generally depend on a variety of factors like corrosiveness of the fluid itself, the metallurgy of the pipeline and the shear rate, temperature, and pressure of the fluid.

A corrosion inhibitor is frequently introduced into the fluid to reduce the rate of corrosion of the metal vessel, pipeline and/or equipment used to store and transport the fluid.

OLKLIN-VES is a chemical diverting agent used in carbonate matrix acidizing. Proper acid placement /diversion is required to make matrix acid treatment successful.Diversion is needed also because of permeability contrasts and lithological differences in the reservoir. For a number of years,viscoelastic surfactant (VES) fluids have been used for a variety of stimulation treatment applications, including hydraulic fracturing, acid diverting, and gravel packing. VES fluid systems typically offer higher-retained permeability and conductivity of the formation sand and proppant pack than polymeric systems.